SDI AXLE 2.0

SPECIAL BUILD STEPS REQUIRED
- Cutting Plastic Tubes To Your Desired Width.
- Cutting The Front CVD and Rear Straight Shafts To The Necessary Length.
- Cut the Steering Rod To Match Your Axle Width.

 1.- CHOOSE YOUR CUSTOM WIDTH 

Use our intuitive axle sketcher system. Just drag the parts to see the inner tubes length you need for your axle.

DOWNLOAD Axle Sketcher (Windows)   

DOWNLOAD Axle Sketcher (MAC)   


FOR MAC USERS: If you see an unidentified developer warning  when you try to open an app for the first time. Follow this steps:
1.- Ctrl-Click or right-click on the app.
2.- Select "Open" from the resultant menu and the app will be opened anyway, and an exception will be created for opening it normally (i.e. by double-clicking) in future.



You can also use one of the links bellow to choose your inner tubes length and to know all other necessary dimensions you will need.
Note other users might be using the same sheet at the same time, if so get back here and click on other link.

AxleCalc1    AxleCalc2

 2.- CLICK ON PRODUCT CUSTOMIZATION TAB  to enter the values.

 3.- STEP BY STEP BUILD UP MANUAL  HERE IN OUR FACEBOOK PAGE :-) 

PART LIST:

- METAL PARTS
4 x InnerTubes (Custom Cut as per customer specification)
2 x Rear Straight Shaft
2 x Front CVD Shaft
2 x Front CVD Cylinder
2 x Front CVD Cup
2 x Front CVD Pin
2 x Pinion
2 x Spur Gear (Spool)
1 x Steering Rod
2 x Pinion Spacer
 
- PLASTIC PARTS
2 x Diff Box
2 x Diff Box Cover/Output
2 x Axle Tube (Mixed Front/Rear)
2 x Front Axle End Half C
2 x Knuckle
2 x Steering Rod End
1/0 x Steering Extension Kit (3D print + long grub Screw) (only needed for wider axles)
1 x 4.7mm ball Rod End (For Steering Rod link)

-SCREWS
1 x M2 SDI Ball Screw (For Steering Rod Link)
12 x M1.6x12mm Allen Head (fasten Diff Box Rear Cover)
4 x M1.6x5mm Allen Head (fasten Diff Box Rear Cover only on the meridian of the part)
16 x M3x4mm set screw dog point (lock plastic axle housing with inner tube)
3 x M3x4mm set screw dog point (lock pinion)
4 x M2x14mm Allen Head (fasten front axle half C)
2 x M2x10mm Allen Head (joints Knuckles with Steering Rod Ends)
4 x M2x6mm Countersunk (lock Rear Axle external bearing)1 x M2 - 4.7mm Ball Screw ( for Steering Rod link)

- BEARINGS & SHIMS
4 x 10x6mm (Bevel Spur Gear / Spool)
2 x 15x10mm (CVD Cup)
4 x 8x4mm (Pinion)
4 x 9x5mm (CVD Cup and Rear Shaft))
4 x 6x3mm (Knuckle)
4 x 8x5mm Shims (for Rear Shaft) 

Because this axle is full customizable in width its imposible to manufacture a universal upper link mount, so
YOU NEED TO MAKE YOUR OWN UPPER LINK USE THIS TUTORIAL AS GUIDANCE (Click Me!)
Here you have four options in order of difficulty (link the images to see measures)