SDI AXLE 2.0 (Rear Only)

SPECIAL BUILD STEPS REQUIRED
- Cutting Plastic Tubes To Your Desired Width.
- Cutting The Front CVD To The Necessary Length.
- Cut the Steering Rod To Match Your Axle Width.

 1.- CHOOSE YOUR CUSTOM WIDTH 


AxleSketcher    Use this intuitive axle sketcher system, just drag the parts to see the inner tubes length you need for your axle.


You can also use one of the links bellow to choose your inner tubes length and to know all other necessary dimensions you will need.
Note other users might be using the same sheet at the same time, if so get back here and click on other link.

AxleCalc1    AxleCalc2

 2.- CLICK ON PRODUCT CUSTOMIZATION TAB  to enter the values.

 3.- STEP BY STEP BUILD UP MANUAL  HERE IN OUR FACEBOOK PAGE :-) 

PART LIST:

- METAL PARTS
2 x InnerTubes (Custom Cut as per customer specification)
2 x Rear Straight Shaft
1 x Pinion
1 x Spur Gear (Spool)
1 x Pinion Spacer

- PLASTIC PARTS
1 x Diff Box
1 x Diff Box Cover/Output
2 x Axle Tube (Mixed Front/Rear)

-SCREWS
6 x M1.6x12mm Allen Head (fasten Diff Box Cover)
2 x M1.6x5mm Allen Head (fasten Diff Box Rear Cover only on the meridian of the part)
8 x M3x4mm set screw dog point (lock plastic axle housing with inner tune)
4 x M2x6mm Countersunk (lock Rear Axle external bearing)

- BEARINGS & SHIMS
2 x 10x6mm (Bevel Spur Gear / Spool)
2 x 8x4mm (Pinion)
2 x 9x5mm (Rear Shaft))
2 x 8x5mm Shims (for Rear Shaft) 

YOU NEED TO MAKE YOUR OWN UPPER LINK.
Here you have four options in order of difficulty (link the images to see measures)