Wagon Wheels


4 Wagon Stamp Wheel 1,9 - 35% OFF Maximize

4 Wagon Stamp Wheel 1,9 - 35% OFF

Get 4 wagon stamp wheels with 35% OFF

More details

Pack content

1 x Wagon Stamp Wheel 1,9 (1 piece)

Get 4 or more and benefit of 5% discount!


231 Items in stock


Product From (qty) Discount
4 Wagon Stamp Wheel 1,9 - 35% OFF 4 -5%

High detailed bead lock steel wheel made by stamping.


- Outside Diameter 1,9 Inches.
- Steel made.
- Bead lock system that works with the majority of bead lock tires available by other brands.
- Realistic M2 bolts and nuts.
- No hex.
- Ultra slim hub that allows small offset.
- With the purchase of 4 Wagon Stamp Wheels we include 2 M2x12mm bolts for easy assembly.
 Wagon Stamp Wheel white

Wagon Stamp Wheel BlackWagon Stamp Wheel bare metal

The mounting system needs NO hexagon but fits all axles of Tamiya TLT-1, TA-01/TA-02, CC-01, CR-01, Lossi RC-18 mini crawler and Axial SC-10 , simply remove the hex and fit the wheel in making the pin to match the slot.

Because of no hex, and our ultra slim hub the SDI Wagon Stamp Wheels have an offset of +1.5 which, compared to other stamp wheels by other brands makes a difference of about 4.5mm less offset or even more. Note S.D.I. Offset measutement is allways compared to the touring car tamiya wheels offset (touring cars wheels are offset 0 , high lift/pajero/jeep/hummer are offset + 2).

In other words: SDI Wagon Stamp Wheel will give you practically same width as tamiya high lift wheels (just 0.5 mm less each side).

Please mind the benefits of small offset, it will help to get your tires avoid rubbing or nicely get under the fenders on suspension travel.


scrub radius

In real cars, the Scrub Radius is the distance between the Steering Axis (given by inclined KingPin) and the tire contact surface centerline as per shown in this image:

In theory , for a optimum steering, this distance must be zero, nevertheless most manufacturers make this distance not zero cause it will affect the handling of the vehicle , positive and negative scrub radius are commonly used depending on many factors (front or rear drive , understeer or oversteer preferences...), but in any case this distance is always very small in real cars.

Please check this article about Scrub Radius in SUVs and Light Trucks ,specially the comparisons page


If you take a look to the tables of the article's "Comparisons" page you will see that the maximum positive Scrub Radius they use is 54.8 mm (2,16 in). Then, converting this value to RC world on 1:10 scale, we get 5.5 millimeters.

Click on the image to enlarge


Now take a look on your typical Tamiya TLT-1 Axle


Because KingPin is not inclined and we have the fat hexagon as wheel mounting system , the distance from the Steering Axis to the center of wheel with regular Tamiya +2 offset is about 19 millimeters, almost 4 times bigger of the maximum scrub radius for real SUVs !!!

This huge positive scrub radius has some negative side effects:

    a.-You need higher torque servo to steer.
    b.-your front tires will move so much back and forward as you steer which:

  1.- can make you lose stability trialing on difficult terrain as you steer the wheels.
2.- makes easier to break steering parts if your tire gets locked on rocks and you keep pushing the steering.
3.- makes easier to rub your fenders when suspension is compressed and steering together.
4.- It's not cool or scale.

So, negative offsets SDI Wagon Wheels will help not only to get a scaled narrowed look, but also, will help to get better steering geometries.

Click on the image to enlarge


  • Color White

No customer comments for the moment.

Write your review

4 Wagon Stamp Wheel 1,9 - 35% OFF

4 Wagon Stamp Wheel 1,9 - 35% OFF

Get 4 wagon stamp wheels with 35% OFF

Write your review